Industrial Line · 90 Models
90 industrial PoE models — compact units for poles and cabinets, Easy managed and L2+ mainstream models, L3 and bt flagships — built for surveillance, transport and factory environments.
Industrial PoE switches do the access layer's hardest jobs: powering cameras on poles, gates, tunnels and factory floors, where the switch itself lives in an unconditioned cabinet. The ONV industrial PoE catalogue counts 90 models — from 2-port units that ride a DIN rail next to the device they power, through the Easy managed and L2+ gigabit mainstream, to 10G-uplink L3 models and 802.3bt variants for high-power outdoor devices.
Selection in this line turns on environment and topology rather than port count alone: mounting (DIN rail vs rack), ring redundancy for paths that cannot fail, fiber uplinks for long outdoor runs, and a PoE budget that holds up when every camera's heater switches on at once in winter. Each model's datasheet carries its environmental and protection ratings — the featured table shows the format, and our sales team confirms the rating of any specific model at quotation.
Gigabit models from the 90-model industrial PoE catalogue (official product names).
| Model | Official product name |
|---|---|
| ONV-IPS33018PFM | Gigabit 18-port L2+ managed industrial PoE switch |
| ONV-IPS33026PFM | Gigabit 26-port L2+ managed industrial PoE switch |
| ONV-IPS33020PFM | Gigabit 20-port L2+ managed industrial PoE switch |
| ONV-IPS33024PM-8F | Gigabit 24-port L2+ managed industrial PoE switch |
| ONV-IPS33010PFM | Gigabit 10-port L2+ managed industrial PoE switch |
| ONV-IPS33006PFM | Gigabit 6-port L2+ managed industrial PoE switch |
| ONV-IPS33024PM | Gigabit 24-port L2+ managed industrial PoE switch |
| ONV-IPS33016PM | Gigabit 16-port L2+ managed industrial PoE switch |
| ONV-IPS33148PFM | Gigabit 14-port L2+ managed industrial PoE switch |
| ONV-IPS33064PFM | Gigabit 6-port L2+ managed industrial PoE switch |
| ONV-IPS33108P | Gigabit 10-port industrial PoE switch |
| ONV-IPS33168PFM | Gigabit 16-port L2+ managed industrial PoE switch |
The ONV-IPS33018PFM is the industrial mainstream in one model: 16 gigabit PoE ports at 30W, a 250W budget, L2+ management with console port, and SFP uplinks whose datasheet reach runs to 40 km on single-mode (1310nm) and 120 km (1550nm) by module.
| Parameter | Datasheet value |
|---|---|
| PoE ports | Port 1–16, IEEE 802.3 af/at |
| Max power per port | 30W |
| Total PoE power | 250W (AC100–240V) |
| Switching capacity | 52 Gbps (non-blocking) |
| Forwarding rate | 26.78 Mpps |
| MAC address table | 8K |
| Buffer memory | 6M |
| Console | 1 × RS232 console port |
| Optical reach (via SFP) | Multimode 0–550m; single-mode 1310nm 0–40km, 1550nm 0–120km |
Start with the cabinet, not the catalogue: rail space decides DIN-rail class vs rack; the site's temperature and surge exposure decides which model's ratings you verify in its datasheet; the topology decides management — ring-capable L2+/L3 models wherever a single cable cut must not black out a camera chain. Then size ports and budget as you would for any PoE switch, with winter heater loads included. The industrial buying guide in the blog lists the verification items in order.
Smart traffic and intersections, perimeter and border surveillance, factories and logistics yards, tunnels, ports, energy sites and smart-city pole networks — the environments the company's industrial line is designed for.
Environment and topology features rather than the PoE itself: compact rail-mount form factors, wider environmental ratings (stated per model in its datasheet), fiber uplinks for long noisy runs, and ring redundancy in the managed models. The PoE delivery is the same 802.3 af/at/bt standards as the commercial line.
Yes — they deliver standard af/at (and on bt models, bt) power. Any standards-compliant camera, AP or sensor runs on them.
Send your port count, per-port power and uplink requirements — we reply with the exact models, datasheets and a quotation. MOQ and lead time are confirmed per model and order scope in the quotation.
What to verify in the datasheet.
