Industrial PoE · DIN Rail
In a control cabinet there is no rack — there is a rail. The compact end of ONV's industrial PoE line is built for it: small metal units that clip beside the PLC, the power supply and the camera they feed.
DIN rail mounting is the grammar of industrial enclosures: power supplies, PLCs, relays and network hardware all clip onto the same 35mm rail. The DIN-rail class of the ONV industrial PoE range covers the compact models — 2 to 10 ports in gigabit and 10/100M, unmanaged, Easy managed and L2+ managed, several with SFP fiber uplinks for the run back to the control room.
A note on method: mounting hardware varies by model, and the catalogue's product names state ports and management rather than mounting. Treat the table below as the compact industrial class from which rail-mount builds are drawn — at quotation we confirm the mounting kit and dimensions of the exact model against its datasheet, so the unit that arrives fits the cabinet you have.
Compact models (2–10 ports) from the industrial PoE catalogue — the DIN-rail mounting class (official product names).
| Model | Official product name |
|---|---|
| ONV-IPS33010PFM | Gigabit 10-port L2+ managed industrial PoE switch |
| ONV-IPS33006PFM | Gigabit 6-port L2+ managed industrial PoE switch |
| ONV-IPS33064PFM | Gigabit 6-port L2+ managed industrial PoE switch |
| ONV-IPS33108P | Gigabit 10-port industrial PoE switch |
| ONV-IPS53064PM | Gigabit 6-port Easy managed industrial PoE switch |
| ONV-IPS53108PFMA | Gigabit 10-port Easy managed industrial PoE switch |
| ONV-IPS53084PFM | Gigabit 8-port Easy managed industrial PoE switch |
| ONV-IPS31021PFS | 10/100M 2-port industrial PoE switch |
| ONV-IPS33021PFS | Gigabit 2-port industrial PoE switch |
| ONV-IPS57064PF | 2.5G 6-port industrial PoE switch |
| ONV-IPS57008PF | 2.5G 9-port industrial PoE switch |
| ONV-IPS3032PF-SFP | Gigabit 3-port industrial PoE switch |
At the class's upper edge, the ONV-IPS33018PFM shows what the managed models carry: 16 PoE ports, L2+ management, console port and SFP uplinks. Compact rail builds use its smaller siblings in the table; the datasheet discipline is the same — every value confirmed per model.
| Parameter | Datasheet value |
|---|---|
| PoE ports | Port 1–16, IEEE 802.3 af/at |
| Max power per port | 30W |
| Total PoE power | 250W (AC100–240V) |
| Switching capacity | 52 Gbps (non-blocking) |
| Forwarding rate | 26.78 Mpps |
| MAC address table | 8K |
| Buffer memory | 6M |
| Console | 1 × RS232 console port |
| Optical reach (via SFP) | Multimode 0–550m; single-mode 1310nm 0–40km, 1550nm 0–120km |
Measure the cabinet before the catalogue: rail length, depth behind the door, and the power supply already on the rail (many industrial models run on DC input from the cabinet supply — confirm the input in the datasheet). Then choose management by topology: a single cabinet feeding local cameras can be unmanaged; cabinets chained along a road or line should be ring-capable managed models with fiber uplinks.
Intersection and pole cabinets, factory control cabinets, gate and barrier systems, elevator and tunnel service boxes, and distributed cabinets along roads, pipelines and production lines.
Mounting arrangements vary across the 90-model industrial catalogue. We confirm the mounting kit for the exact model against its datasheet before quotation, so there are no surprises at installation.
Many industrial models are designed for DC input from cabinet power supplies; the featured managed model's datasheet lists AC100–240V, so the answer is per model. State your cabinet supply (24V/48V DC or AC) in the inquiry and we will match models to it.
Send your port count, per-port power and uplink requirements — we reply with the exact models, datasheets and a quotation. MOQ and lead time are confirmed per model and order scope in the quotation.
Cabinet-first selection.
