PoE Switch · Plug and Play
No configuration, no passwords, no management overhead — smart unmanaged PoE switches with hardware function switches for long-distance mode, VLAN isolation and the PoE watchdog.
An unmanaged PoE switch is the right tool when the network is fixed and nobody will ever log into it: small camera systems, shop and restaurant networks, home and small-office installations. ONV's unmanaged and smart lines run from 4 to 28 ports, in 10/100M and gigabit versions, with built-in power supplies and desktop or wall-mount bodies.
Unmanaged here does not mean featureless. The smart models carry a hardware function switch: position E enables 250-metre long-distance transmission with port VLAN isolation, and position D enables the PoE watchdog, which monitors each powered port and restarts a device that stops communicating. These are set once with a fingertip at installation — no interface, no firmware, no training.
Unmanaged and smart models from the PoE switch catalogue (official product names).
| Model | Official product name |
|---|---|
| ONV-H1064PLD | 10/100M 6-port smart PoE switch |
| ONV-POE31004PLD | 10/100M 5-port smart PoE Switch |
| ONV-POE33032PL | Gigabit 3-port PoE switch |
| ONV-H3064P | Gigabit 6-port PoE switch |
| ONV-H3108P | Gigabit 10-port PoE switch |
| ONV-H3064PS | Gigabit 6-port PoE switch |
| ONV-H3108PS | Gigabit 10-port PoE switch |
| ONV-POE33108PFG | Gigabit 10-port PoE switch |
| ONV-POE31008PLD | 10/100M 9-port smart PoE switch |
| ONV-POE37024PF | 2.5G uplink 26-port PoE switch |
| ONV-POE37016PF | 2.5G uplink 18-port PoE switch |
| ONV-POE56024PF | 10G uplink 26-port PoE switch |
The ONV-H1108PLD is the archetype: 8 PoE ports at 30W, a 120W built-in supply, 2 uplinks, and the E/D function switches — its full datasheet values are in the table.
| Parameter | Datasheet value |
|---|---|
| PoE ports | Port 1–8, IEEE 802.3 af/at |
| Uplink ports | 2 × 10/100Base-TX RJ45 |
| Max power per port | 30W |
| Total PoE power | 120W (built-in PSU, AC100–240V) |
| Switching capacity | 2 Gbps (non-blocking) |
| Forwarding rate | 1.488 Mpps @64byte |
| MAC address table | 2K |
| Long-distance mode | 10M / 250 meters transmission (function switch E) |
| PoE watchdog | Function switch D |
| Dimensions | 195 × 130 × 40 mm |
Choose unmanaged when three conditions hold: the topology will not change, no VLAN segmentation is required, and nobody needs remote visibility. The moment any of these fails — a second tenant, a compliance audit, a maintenance contract — a managed model is the cheaper long-term answer. The managed vs unmanaged guide works through the trade-off in detail.
Retail, restaurants, small offices, homes, parking booths and small warehouses — fixed camera counts, no IT staff, and a premium on zero-maintenance operation.
It watches the data activity of each powered port. If a camera or access point stops communicating, the switch cuts and restores that port's PoE power, rebooting the device automatically. On the smart models it is enabled with the D position of the function switch.
They cannot be configured with VLANs, but the smart models' E mode applies a fixed port isolation: downlink ports cannot talk to each other, only to the uplink — which covers the most common small-network segmentation need.
Send your port count, per-port power and uplink requirements — we reply with the exact models, datasheets and a quotation. MOQ and lead time are confirmed per model and order scope in the quotation.
Automatic recovery, scaled up.
The decision guide.
